As I was planning my mantle for this Christmas season, I knew I wanted to create some rustic shabby chic stockings to go with the other decorations I was planning. So I started rummaging through my fabric and came up with a design for these.
The body of the stocking is made from a canvas paint cloth, and the ruffles are scrap fabric that I had leftover from other projects.
- Canvas paint cloth or burlap (or any other fabric that you would like to use) – The stocking measures 19″ X 11″ and you will need to cut it out twice for one stocking.
- Fabric of your choice for the ruffle – I started with a strip of fabric about 4-5″ in height and about 58″ in length.
- String, ribbon, or fabric for the hanging loop
- Sewing machine
- Fabric scissors
You can print out the pattern I created (StockingPattern), or if you have a stocking that you like the size and shape of you can trace that. Sorry for the very rough pattern, this is my original hand drawn pattern. I will work on getting it updated, but I wanted to give you something today.
Double the fabric and pin your pattern or trace your stocking and cut out the fabric so you have two pieces of the same stocking shape.
Hem the top of each piece of your stocking. I prefer to do this before I sew the two pieces of the stocking together, but you could do it after the next step as well. Be sure if you hem them before you sew them together that your hems go the opposite direction. I found it was easiest to lay them together and have the hems coming out towards me on each side.
Pin and sew your two sides of your stocking together with the right/pretty sides facing in and wrong sides facing out. If you hemmed before this step you want your hems facing out. If you waited to hem after this step, then you can hem the top now.
Flip your stocking right side out. I find it easiest to run my finger or a closed pen along the seam to get it pushed out.
Now cut out your ruffle fabric to be about 4-5″ in height and about 58″ in length. I just cut as straight as possible down the side of my fabric. If you fabric isn’t quite long enough you can cut out two pieces and sew them together.
Hem each side of your ruffle fabric (all four sides). I left the ends of my ruffle fabric rough on one of my stockings, but I felt like the ones that I hemmed looked better. I did not sew the two ends of the ruffle fabric together to make a circle because I wanted to have some flexibility with the length if it was a little long.
Next is ruffling. There are several ways to ruffle fabric. You can use a ruffler foot on your sewing machine, you can set your sewing machine on a long step length and then pull the thread on each end of your fabric to ruffle, you can hand ruffle with a needle and thread, or you can hand ruffle with your sewing machine. I like the last option the best. As I sew I bunch/fold the fabric just before it goes under my sewing machine foot. This worked perfect for this project because I wanted to have some fabric ruffled above the top of my stocking and I wanted to have a ruffle skirt below the top of my stocking. I decided how much I wanted to have on each side (about an inch on top and the rest on the bottom) and then placed the fabric at that point as it went under my sewing machine foot. Then I just used my hands to bunch from both sides just as it was going under the foot. It is a little slow going, but this is my preferred way of ruffling.
Before I did these stockings, I measured the length around the top of my stockings which was 18″. I laid out my sewing tape to 18″ so I had a visual of how long I needed it to be and I adjusted my ruffle as I went (ruffle more if it was looking too long, ruffle less if it was looking too short). It doesn’t have to be perfect, but too long is way better than too short. If it comes out a little long you can overlap the ruffle or ruffle a little more as you are attaching it to the stocking. In fact, I felt it looked better to have 1/2″ to 1″ of overlap. I have been ruffling like this for years, so I am not saying this is the easiest way, but it is the easiest way for me. No changing of the sewing machine foot, no cursing when your thread breaks if you are trying to pull the ruffle, and no stabbing myself with a needle when I hand sew (one of the many reasons I don’t like to hand sew).
This is what you will end up with once ruffled.
Then pin your ruffle to the top of your stocking and carefully sew along your already sewn ruffle line. As I was pinning I lined my sewn ruffle line up just below my hemline on the top of the stocking.
Last, sew your ribbon, twine, or fabric to the top edge of your stocking at the desired length you would like it. Be careful because with all that ruffle it is easy to get it folded over when sewing this piece on.
Another option with these stockings would be to paint/write names or holiday words on them to further personalize them. I decided to leave them simple, but there are always options to spruce them up some more in the future.
I love how these stockings turned out, and I can’t wait to see all your stocking creations!
Please let me know if you have any questions.
I would love if you would pin and share this with your friends!
Thanks so much.